VIVO S7i Flashing and ROM Firmware Download

Do you have Vivo android S7i that is bricked? Never worry because on this page you will download the ROM. This firmware has been tested and working 100%. Check your phone to ensure is same firmware that matches this one here.


Download Stock firmware of Vivo S7i

File Name: Vivo S7i MT6572

File Size: about 1GB

How to flash: Learn this tutorial
  In Case You are new Read this details                   
File Name: Vivo_S7i MTK

To flash Vivo S7i follow below steps

Step 1. Charge the phone battery.
Step 2. Download the phone and flashing software.
Step 3. Extract the phone and rom file.
Step 4. Install the driver on computer.
Step 5. Connect your phone to computer and flash.

see the full details on how to flash.

Note. 

a). Make sure your backup your android rom before flashing. 

b). Make sure you use the phone exact rom or firmware and exact chip number. Try and read phone information to be sure.

c). In case of MTK, don’t flash a phone that indicates No space.

d) zamdroid.com is not responsible for your android brick. Do this at your own risk.

How to back up VIVO S7i with Miracle Box
Set MediaTek PreLoader USB VCOM (Android) (COM10)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6572 SW:0001 Ver: CA01
  Downloading Boot11 …
  EMMC Size: 0x00E9000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x40000000
  Formatting Nand Flash…
  Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Insert USB cable. In some cases Required Hold BootKey
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Waiting for USB Port…
  Set MediaTek PreLoader USB VCOM (Android) (COM10)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6572 SW:0000 Ver: CA00
  Downloading Boot11 …
  EMMC Size: 0x01D2000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x40000000
  Reading infr(EMMC)…
  WIFI MAC:3CA34865ABC4
  BT_ADDR:3CA34865ABC3
  IMEI1:8xxxxxxxx
  IMEI2:86xxxxxx
  id: Vivo S7i release-keys
  version:xxxxx
  brand:vivo
  manufacturer:vivo
>>Done.
Click Read>>Scatter File>>Start.