Do you have Vivo android Y15 that is bricked? Never worry because on this page you will download the ROM. This firmware has been tested and working 100%. Check your phone to ensure is same firmware that matches this one here.
Download Stock firmware of Vivo Y15
File Name: Vivo Y15 PD MT6582
File Size: about 1GB
How to flash: Learn this tutorial
Rom Link: download Vivo Y15 firmware.
See other version
File Name: Vivo Y15 direct backup
Rom Link download here
To flash Vivo Y15 follow below steps
1. Step 1. Charge the phone battery.
2. Step 2. Download the phone and flashing software.
3. Step 3. Extract the phone and rom file.
4. Step 4. Install the driver on computer.
5. step 5. Connect your phone to computer and flash.
see the full details on how to flash.
Note.
a). Make sure your backup your android rom before flashing.
b). Make sure you use the phone exact rom or firmware and exact chip number. Try and read phone information to be sure.
c). In case of MTK, don’t flash a phone that indicates No space.
d) zamdroid.com is not responsible for your android brick. Do this at your own risk.
How to back up VIVO Y15 with Miracle Box
Set MediaTek PreLoader USB VCOM (Android) (COM10)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6582 SW:0001 Ver: CA01
Downloading Boot11 …
EMMC Size: 0x00E9000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Formatting Nand Flash…
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port…
Set MediaTek PreLoader USB VCOM (Android) (COM10)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6582 SW:0000 Ver: CA00
Downloading Boot11 …
EMMC Size: 0x01D2000000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x40000000
Reading infr(EMMC)…
WIFI MAC:3CA34865ABC4
BT_ADDR:3CA34865ABC3
IMEI1:8xxxxxxxx
IMEI2:86xxxxxx
id: Vivo Y15 release-keys
version:xxxxx
brand:vivo
manufacturer:vivo
>>Done.
Click Read>>Scatter File>>Start.